There’s a new SirinFPV on the block ( revision G) and I got a chance to try it out! I have been told there are only a few changes ( MPU6000 vs 6500 and Onboard 3.3v) but those are very significant to me! The MPU6000 from what I hear is a better gyro, runs 8khz SPI and does not have the jitter problem the 6500 has. The 3.3v while it may seem small helped out my build a lot. With the Owl camera it has a little voltage regulator it comes with which converts 5-24v down to 3.3v for the camera… I can finally scrap that and wire it in directly.