![\"\"](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2024\/09\/image.png\")
<\/figure>\n\n\n\n- \n
- FuriousFPV PIKO BLX<\/li>\n\n\n\n
- RotorX 1105B 6500KV<\/li>\n\n\n\n
- Gemfan Flash 2540<\/li>\n\n\n\n
- FrSky XM+<\/li>\n\n\n\n
- RunCam Micro Swift<\/li>\n\n\n\n
- Omnibus F3 Nano<\/li>\n<\/ul>\n\n\n\n
Airblade 3″ Eclair V2 Lite<\/h2>\n\n\n\n
![\"\"](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2024\/09\/image-1.png\")
<\/figure>\n\n\n\n- \n
- Airblade AB1404 3850kV SuperMan<\/li>\n\n\n\n
- HGLRC F4 Zeus<\/li>\n\n\n\n
- Runcam Split Mini<\/li>\n\n\n\n
- FrSky R9 Mini<\/li>\n\n\n\n
- RotorX Triblade RX 3044T<\/li>\n<\/ul>\n\n\n\n
Airblade Intrepid 5″<\/h2>\n\n\n\n
![\"\"](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2024\/09\/image-2.png\")
<\/figure>\n\n\n\n- \n
- DYS F4 PRo<\/li>\n\n\n\n
- Emax Bullet 30A ESC<\/li>\n\n\n\n
- DYS Thor<\/li>\n\n\n\n
- RunCam Split (V1)<\/li>\n<\/ul>\n\n\n
QuadRevo Rage X<\/h2>\n
I have
two<\/del>three<\/del>two<\/del> “three” QuadRevo Rage X’s… they are meant for racing. The original ideal was to have multiple identical setups so that in the event of destroying one in a race I could easily swap it out for another. Due to the evolving nature of this hobby I have realized that it’s really not feasible to keep all of them up to date with the latest technology. Although this presented a unexpected benefit though; I can keep them similar and change little things and I’ll know if there really is a difference or if it’s just “hype”.<\/p>\nI am trying to do my best to keep this page updated with the current components. I no longer provide the CLI Dump because honestly I’m barely adjusting the tune now days.<\/p>\n
QuadRevo 5″ Rage X Revolt<\/strong><\/p>\n
Frame: QuadRevo 5″ Rage X (pre-production)
\n<\/a>Brushless Motors:\u00a0Emax RS2205-2600KV<\/a>
\nElectronic Speed Controllers: Aikon SEFM 30A BLHeli_S
\n<\/a>PDB: QuadRevo PowerOSD Pro<\/a>\u00a02
\nFlight Controller:\u00a0RaceFlight Revolt
\nFirmware:\u00a0RaceFlight
\nPropellers:\u00a0DALprop T5045C Cyclone Three Blade Prop<\/a>
\nFlight Camera: \u00a0RunCam Swift\u00a0(settings<\/a>)
\nVideo Transmitter: TBS Unify Pro 5.8 GHz HV Race<\/a>
\nAntenna: Foxeer 5.8 GHz Stubby RHCP<\/a>
\nReceiver: FrSky XSR<\/a>
\nController: Taranis Plus<\/a><\/p><\/blockquote>\n<\/p>\n
QuadRevo 5″ Rage X\u00a0Hyperlite<\/strong><\/p>\n
Frame: QuadRevo 5″ Rage X (pre-production)
\n<\/a>Brushless Motors:\u00a0Emax RS2205-2600KV<\/a>
\nElectronic Speed Controllers: Aikon SEFM 30A BLHeli_S
\n<\/a>PDB: QuadRevo PowerOSD Pro<\/a>
\nFlight Controller: Hyperlite F4
\nFirmware:\u00a0RaceFlight
\nPropellers:\u00a0DALprop T5045C Cyclone Three Blade Prop<\/a>
\nFlight Camera: \u00a0RunCam Swift\u00a0(settings<\/a>)
\nVideo Transmitter: TBS Unify Pro 5.8 GHz HV Race<\/a>
\nAntenna: Foxeer 5.8 GHz Stubby RHCP<\/a>
\nReceiver: FrSky XSR<\/a>
\nController: Taranis Plus<\/a><\/p><\/blockquote>\n<\/p>\n
QuadRevo 4″ Rage X\u00a0<\/strong><\/p>\n
Frame: QuadRevo 4″ Rage X (pre-production)
\n<\/a>Brushless Motors:\u00a0Emax RS2205-2600KV<\/a>
\nElectronic Speed Controllers: DYS XSD 20A BLheli_S<\/a>
\n<\/a>PDB: QuadRevo PowerOSD Pro<\/a>
\nFlight Controller:\u00a0Lumenier LUX<\/a>
\nFirmware:\u00a0Betaflight 3.0.1
\nPropellers:\u00a0DALprop T5<\/a>045BN
\nFlight Camera: \u00a0HS117<\/a>\u00a0(settings<\/a>)
\nVideo Transmitter: FX668T 5.8 GHz 40 Channel 200mW<\/a>
\nAntenna: Foxeer 5.8 GHz Stubby RHCP<\/a>
\nReceiver: FrSky XSR<\/a>
\nController: Taranis Plus<\/a><\/p><\/blockquote>\n<\/p><\/blockquote>\n
Batteries (they share batteries):<\/strong><\/p>\n
Tattu 1050 4S 75c
\n<\/a>CNHL G+ 13000mAh 70c
\nTurnigy Graphene 4S 1300mah
\nTurnigy Bolt 4S 1300mah<\/p><\/blockquote>\nQuadRevo 210<\/h2>\n
<\/p>\n
![\"First](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/02\/IMG_20150918_211301-300x225.jpg\")
First build of the QuadRevo 210!<\/figcaption><\/figure>\n The QuadRevo Rage 210 is a 4mm bottom plate 3K Twill weave carbon fiber. This was my second frame from QuadRevo and a true beast. Capable of running 5″ props it has plenty of power to go around. This was the quad I took raced at the California Cup Finals in Southern California. Despite many people at the races utilizing X frames, I was still able to take home 2nd place.<\/p>\n
Since it’s original build back in September, very little has changed, replaced motors\/esc’s when needed. Shortened the stack a bit, but the overall components have been identical since it’s first build.<\/p>\n
<\/p>\n
Frame: QuadRevo 210
\n<\/a>Brushless Motors: Lumineer\u00a0RX2206-11 2350kv<\/a>
\nElectronic Speed Controllers: FVT LittleBee\u00a030amp<\/a>
\nPDB: QuadRevo PowerOSD Pro<\/a>
\nFlight Controller: Sparky v1.1
\nPropellers: GemFan Tri-Blades 5045
\nFlight Camera: \u00a0HS1177\u00a0<\/a>
\nVideo Transmitter: FX799T (200mw)<\/a>
\nAntenna: VAS 5.8 GHz RHCP DuraSpec<\/a>
\nReceiver: FrSky X4R<\/a>
\nController: Taranis Plus<\/a><\/p>\nBatteries:
\nTattu 1050 4S 75c<\/a>
\nMultistar RaceSpec 1400<\/p>\nAirblade 130X<\/h2>\n
![\"\"](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161121_164750634-e1482865233158-1024x630.jpg\")
Airblade X ready for action!<\/figcaption><\/figure>\n ![\"\"](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2017\/02\/IMG_20170212_092147411_HDR-e1487267625699-1024x723.jpg\")
Creampuff<\/figcaption><\/figure>\n Here is a list of the various AirBladeUAV quads.<\/p>\n
The Emax motors feel a bit more peppy but it’s not a HUGE difference imo. Plus most of the time you are flying a 130 you are flying it in tight conditions so the extra power may not be utilized much.<\/p>\n
Airblade 130 X-Racer – Emax<\/strong><\/p>\n
Frame – AirBladeX 130 X-Racer 3K Carbon Fiber Frame
\nFlight Controller – SirinFPV Flight Controller<\/a>
\nESCs – DYS XS20A ESC – BLHeli_S<\/a>
\nMotors – EMAX RS1306 4000 KV RaceSpec Brushless Motor<\/a>
\nPropellers – RotorX RX3040 Prop<\/a>
\nFPV Camera – RunCam Owl
\nAntenna – Foxeer 5.8 GHz STUBBY RHCP Antenna<\/a>
\nReceiver – FrSky XSR CPPM\/S.Bus Receiver<\/a><\/p>\nAirblade 130 X-Racer – DYS<\/strong><\/p>\n
Frame – AirBladeX 130 X-Racer 3K Carbon Fiber Frame
\nFlight Controller – SirinFPV Flight Controller<\/a>
\nESCs – DYS XS20A ESC – BLHeli_S<\/a>
\nMotors – DYS BX1306 4000kv Brushless Motor<\/a>
\nPropellers – RotorX RX3040 Prop<\/a>
\nFPV Camera – “520” Camera<\/a>
\nAntenna – Foxeer 5.8 GHz STUBBY RHCP Antenna<\/a>
\nReceiver – FrSky XSR CPPM\/S.Bus Receiver<\/a><\/p>\nAirblade Creampuff<\/strong><\/p>\n
Frame –\u00a0AirBladeUAV Creampuff<\/a>
\nFlight Controller –\u00a0FuriousFPV PIKO BLX<\/a>
\nESCs –\u00a0DYS XM10<\/a>
\nMotors –\u00a0RotorX 1105B 6500kV
\nPropellers –\u00a0RotorX RX2535
\nFPV Camera \/ VTX – Eachine TX03
\nReceiver –\u00a0FrSky XM<\/a><\/p>\nBatteries:<\/strong><\/p>\n
Airblade 130 X<\/strong>
\n<\/a><\/p>\nTattu 850 4S 75c
\n<\/a>Airblade Premium 850mah 4S 75c LiHV
\n<\/a>Turnigy Nano-Tech 850 4S 45-90C<\/p>\nAirblade Creampuff<\/strong><\/p>\n
Tattu 450mah 3S 75c<\/a><\/p>\n
\u00a0FloRotors 130<\/h2>\n
![\"FloRotor](\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/06\/IMG_20160604_102935763_HDR-1024x576.jpg\")
FloRotor 130 on Scale<\/figcaption><\/figure>\n The small scale racing quad of choice for me is the\u00a0FloRotors 130. It’s falls just under the FAA registrations size and is really a beefy frame… probably more than what is needed. I opted for many “full size” components so that I am able to get the best possible performance with little compromise.<\/p>\n
AUW: 246g
\nFrame: FloRotors 130
\nMotors: DYS BX1306 4000kV<\/a>
\nESC: DYS XM20a<\/a>
\nProps: GemFan 3″ TriBlades<\/a>
\nFlight Controller: Lumenier Lux<\/a>
\nFirmware: Betaflight 2.7.1
\nVTX: FX688T-2 (200mw tx)<\/a>
\nCamera: Micro 600TVL (170deg)
\nReceiver: FrSky XSR<\/a>
\nBattery: Turnigy Bolt 850 3S<\/p>","protected":false},"excerpt":{"rendered":"This is some of the previous quads \/ multirotors \/ birds I’ve had in the past. Probably a cool way of seeing what we flew previously! Airblade 2.5″ Eclair V2 Airblade 3″ Eclair V2 Lite Airblade Intrepid 5″ QuadRevo Rage X I have two three two “three” QuadRevo Rage X’s… they are meant for […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":215,"menu_order":4,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-9","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/pages\/9","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=9"}],"version-history":[{"count":10,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/pages\/9\/revisions"}],"predecessor-version":[{"id":259,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/pages\/9\/revisions\/259"}],"up":[{"embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/pages\/215"}],"wp:attachment":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=9"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}