{"id":174,"date":"2016-12-19T20:57:28","date_gmt":"2016-12-19T20:57:28","guid":{"rendered":"http:\/\/tenfpv.com\/blog\/?p=174"},"modified":"2016-12-19T20:59:18","modified_gmt":"2016-12-19T20:59:18","slug":"new-sirinfpv-revg","status":"publish","type":"post","link":"https:\/\/tenfpv.com\/blog\/?p=174","title":{"rendered":"New SirinFPV RevG !!!"},"content":{"rendered":"<p><iframe loading=\"lazy\" width=\"750\" height=\"563\" src=\"https:\/\/www.youtube.com\/embed\/dmFcVKalYu8?feature=oembed\" frameborder=\"0\" allowfullscreen><\/iframe><\/p>\n<p>There&#8217;s a new SirinFPV on the block ( revision G) and I got a chance to try it out! I have been told there are only a few changes ( MPU6000 vs 6500 and Onboard 3.3v) but those are very significant to me! The MPU6000 from what I hear is a better gyro, runs 8khz SPI and does not have the jitter problem the 6500 has. The 3.3v while it may seem small helped out my build a lot. With the Owl camera it has a little voltage regulator it comes with which converts 5-24v down to 3.3v for the camera&#8230; I can finally scrap that and wire it in directly.<\/p>\n<p><!--more--><\/p>\n<figure id=\"attachment_175\" aria-describedby=\"caption-attachment-175\" style=\"width: 750px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-large wp-image-175\" src=\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161201_201136223-1024x576.jpg\" alt=\"\" width=\"750\" height=\"422\" srcset=\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161201_201136223-1024x576.jpg 1024w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161201_201136223-300x169.jpg 300w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161201_201136223-768x432.jpg 768w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161201_201136223.jpg 1887w\" sizes=\"auto, (max-width: 750px) 100vw, 750px\" \/><figcaption id=\"caption-attachment-175\" class=\"wp-caption-text\">SirinFPV RevG<\/figcaption><\/figure>\n<p>&nbsp;<\/p>\n<p>All ready and waiting for the install&#8230;<\/p>\n<p>&nbsp;<\/p>\n<figure id=\"attachment_177\" aria-describedby=\"caption-attachment-177\" style=\"width: 750px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-large wp-image-177\" src=\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161210_082148063-1024x576.jpg\" alt=\"\" width=\"750\" height=\"422\" srcset=\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161210_082148063-1024x576.jpg 1024w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161210_082148063-300x169.jpg 300w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161210_082148063-768x432.jpg 768w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_20161210_082148063.jpg 1887w\" sizes=\"auto, (max-width: 750px) 100vw, 750px\" \/><figcaption id=\"caption-attachment-177\" class=\"wp-caption-text\">Wired it backwards&#8230; cost me a polulu and several days<\/figcaption><\/figure>\n<p>&nbsp;<\/p>\n<p>The only thing that died was the polulu thankfully. Once I swapped in a new voltage regulator the quad was up and ready&#8230; except I wired EVERY MOTOR backwards. I had to swap the motors and then swap the bells as I cut the wires to exact lengths. Oh well&#8230; Still managed to get it done in time for race night at City Beach!<\/p>\n<figure id=\"attachment_176\" aria-describedby=\"caption-attachment-176\" style=\"width: 750px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-large wp-image-176\" src=\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_0546-1024x1024.jpg\" alt=\"\" width=\"750\" height=\"750\" srcset=\"https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_0546-1024x1024.jpg 1024w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_0546-150x150.jpg 150w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_0546-300x300.jpg 300w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_0546-768x768.jpg 768w, https:\/\/tenfpv.com\/blog\/wp-content\/uploads\/2016\/12\/IMG_0546.jpg 1110w\" sizes=\"auto, (max-width: 750px) 100vw, 750px\" \/><figcaption id=\"caption-attachment-176\" class=\"wp-caption-text\">Airblade130 ready for take off!<\/figcaption><\/figure>\n<p>&nbsp;<\/p>\n<p>I am happy to report I have no jitter issues with the new SirinFPV, it flies locked in from the start. In the video above I am flying 100% stock PID&#8217;s other than increasing the rate!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>There&#8217;s a new SirinFPV on the block ( revision G) and I got a chance to try it out! I have been told there are only a few changes ( MPU6000 vs 6500 and Onboard 3.3v) but those are very significant to me! The MPU6000 from what I hear is a better gyro, runs 8khz [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7,8],"tags":[],"class_list":["post-174","post","type-post","status-publish","format-standard","hentry","category-builds","category-videos"],"_links":{"self":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/174","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=174"}],"version-history":[{"count":3,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/174\/revisions"}],"predecessor-version":[{"id":180,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/174\/revisions\/180"}],"wp:attachment":[{"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=174"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=174"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/tenfpv.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=174"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}